Ford Truck | Louisville, KY
Products & Production
- U553 | September 2017 – June 2023 (est)
- P558 | July 2016 – September 2022 (est)
- U554 | September 2017 – June 2023 (est)
- On-site Investigation & Fault Analysis
- Established, Professional Relationships with OEM Personnel
- Proactive Identification of Quality Concerns
- Participation in OEM Staff Meetings
- Real-Time Reporting via Qnet™
- Critical Information Distribution to Other Liaisons
- Coordination of Sorting & Containment
- Scrap Claim Monitoring & Negotiation
- Assistance with Special Shipments
- Liaisons Trained to Understand Your Parts & Processes
The TQS Difference
Liaison Network: Unmatched coverage across global OEM locations.
Technology: Our proprietary Qnet™ software connects liaisons and customers in real-time.
Team Coverage: Multiple liaisons & support resources working together to ensure protection & quality.
We get it – your time is valuable. For this reason, we’ve made reserving support easy. Review our team’s resumes, estimate your service hours, and add your part information – all in a matter of minutes.
1. Reserve your hours: Review our rep’s resumes and calculate your hours using an easy-to-use calculator. Finalize and add to cart.
2. Describe your challenges: During check-out, you’ll be prompted to provide a part-list and description of part issues. From here, you’ll submit your order.
3. Connect with our Team: Our customer service team will follow up with your order and finalize the number of hours, specifications, and team introductions.
4. Onsite support begins: Your service begins! Your quality issues become a thing of the past and your reputation at the OEM is established.
Frequently Asked Questions
How do "Contracted Units" work?
A “Contracted Unit” (sometimes called a “Contracted Hour“) is essentially reserving portion of our liaison’s time to monitor and address issues with your supplied parts.
Contracted Units are minimum weekly billing amounts. Contracted Units help us manage the capacity of our field liaisons, and ensure they have adequate time to investigate, isolate, and communicate potential quality issues at your product’s point of use.
For example, for an agreement that’s 10 Contracted Units, your on-site liaison will work up to approximately 10 hours per week. Should your liaison need to work more than the contracted amount, he/she will request “Additional Hours” which are billed at a premium rate. Additional Hours require customer pre-approval.
What if I need more than my "Contracted Units" or need my liaison to work overtime?
For isolated incidents when your liaison may need to work more than your weekly Contracted Units, your liaison will request authorization to work “Additional Hours“.
Additional Hours are billed at a premium rate (x1.5) on top of your weekly Contracted Units. Additional Hours can be thought of as overtime for your liaison.
When requesting approval for Additional Hours, your liaison will specify the number of hours he/she believes is necessary to resolve the issue, as well as a description of the issue and reason for the overtime. Additional Hours can be approved or declined quickly via email, our Qnet™ mobile app, or Qnet™ web portal.
Am I billed when the plant is shutdown?
For shutdowns less than an entire week (e.g. a USA plant closed for Memorial Day holiday), you will be billed as usual for the entire week.
For shutdowns that last an entire workweek (Monday – Friday), you will NOT be billed for liaison services for that week.
In either scenario, you’ll be notified from Qnet™ if a plant has an upcoming shutdown scheduled.
Am I covered if the plant runs Weekend Production?
You’ll be notified from Qnet™ if a plant schedules (or cancels) Weekend Production.
Because the service locations expect our liaisons to be in the plant when Weekend Production is scheduled, you’ll automatically be billed for Weekend Production per the following table:
|Weekly Contracted Units||Weekend Production Billing|
|0-10||1 hour per weekend day|
|11-39||2 hours per weekend day|
|40+||5 hours per weekend day|
What if my liaison is sick or on vacation?
One of the advantages of partnering with TQS is that you get team coverage, rather than an individual.
While you have a primary liaison you’ll deal with at each plant, TQS has other liaisons at the plant that are cross-trained on your product. This allows our customers to be covered when someone inevitably gets sick or goes on vacation.
In the event that another liaison is covering for your primary liaison, you’ll receive an email notification of the temporary assignment. Plant personnel will also be informed that the liaison is temporarily covering your account.
How will I be billed for pre-SOP production or pilot/validation builds?
TQS understands that pre-SOP/SORP schedules can be sporadic, sparse, and irregular.
If you’re contracting a TQS liaison on the launch of a new vehicle/platform that’s going through pilot/validation builds, we will not bill the weekly Contracted Units until the start of regular production (SORP). Throughout pilot & validation builds (pre-SORP), your liaison will request Additional Hours that will be billed on an as-needed basis.
Once the plant reaches the start of regular production (SORP), your weekly Contracted Units will be activated.
How will I be notified of quality issues at the plant?
If one of your TQS liaisons identifies a quality issue (or potential quality issue), you’ll be notified in real-time via Qnet™, which will include all of the pertinent information, including but not limited to:
- Issue description
- Part number(s)
- Serial numbers & lot dates
- Photos and/or videos of the issue
- Supplier response required by the OEM
Qnet™ also notifies your other TQS liaisons at other locations so they can proactively investigate the issue.
Click here to learn more about Qnet™ and how it can save you hours of headaches every day.
What if my liaisons need special equipment to troubleshoot my parts?
TQS’ trained liaisons are equipped with basic equipment/tools, such as calipers and inspection lights.
Many of our customers have complex electrical or other parts that require special testing equipment. In this scenario, customers are responsible for providing any specialized equipment, and maintaining the calibration and maintenance of such equipment. All equipment/tools will remain the property of the customer.
Since 2006, Jake has been ensuring quality in different sectors. His ability to effectively problem-solve and strict attention to detail allows him to deliver quality service to his customers. Jake provides exceptional communication between the customer and the OEM and is great at building relationships with the appropriate people.
Tonia has more than six years of experience in the automotive quality industry. She thrives in fast-paced environments, takes initiative, and has strong problem-solving skills. Tonia is dedicated to customer satisfaction and getting the job done correctly in a timely manner.